Process capability
Stainless Steel Slitting & Edge Trimming for Coil and Strip
For buyers who need narrow stainless steel strip, Jinling offers coil slitting and edging services with controlled width tolerance, smooth edges, and stable coil winding. Our slitting route supports stainless steel coil, precision strip, decorative materials, and fabrication-ready narrow widths used in stamping, appliance parts, hardware, profiles, and downstream processing.
Specifications
Stainless steel coil slitting and edge finishing range
| Item | Processing Range |
|---|---|
| Material Forms | Stainless steel master coil to slit coil / precision strip |
| Common Grades | 201, 304, 304L, 316L, 430; other grades by coil availability and route review |
| Thickness Range | 0.3 mm - 6.0 mm, depending on grade, slit width, and edge route |
| Slit Width Range | 10 mm - 1,500 mm; narrow strip below 10 mm by special review |
| Coil ID / OD | Master coil ID 508 / 610 mm; master OD up to 1,800 mm; slit coil OD up to 1,200 mm |
| Edge Options | Slit / sheared edge, deburred edge, and rounded edge when specified and technically available |
| Surface Finish | 2B, BA, No.4, hairline, mirror, and AFP with finish-compatible protective film |
| Packing | Narrow coil packing, eye-to-sky or eye-to-wall orientation, pallet support, straps, edge protection |
Slitting & Edging Range
Slitting and edging should be confirmed by material form, thickness, slit width, coil ID, edge route, finish protection, and packing method together. Jinling sets the final width control according to thickness, target width, edge condition, and purchase order requirements, so slit stainless steel coils can run more smoothly in tube mills, roll forming, stamping, appliance parts, and narrow-strip fabrication.
Appliance Parts
Appliance Parts
Slit stainless steel strip supports appliance trims, brackets, hinges, cooker hood parts, panel edges, and visible components where width repeatability and clean edges matter.
Read More
Decorative Trim & Profiles
Decorative Trim & Profiles
Controlled strip width helps decorative profiles, edging strips, cladding details, channels, and architectural trim run with cleaner forming and consistent surface direction.
Read More
Elevator & Interiors
Elevator & Interiors
Elevator cabins, interior trims, ceilings, wall edges, and door details often need narrow stainless strip with stable finish, film protection, and edge control.
Read More
Tube & Pipe Production
Tube & Pipe Production
Welded tube and pipe lines depend on slit coil feedstock with agreed width, burr direction, edge condition, and stable rewind before forming and welding.
Read More
Precision Strip / Hardware
Precision Strip / Hardware
Hardware, clips, spacers, small brackets, and stamped parts benefit from narrow stainless strip with controlled width, deburred edges, and packing for smooth feeding.
Read MoreWhen Do Buyers Need Slitting & Edging?
Choose stainless steel slitting and edging when your downstream process needs narrow strip, controlled width, cleaner edges, stable rewind, surface protection, and packing that keeps slit coils ready for appliance parts, decorative profiles, elevator interiors, tube production, precision hardware, and repeated feeding lines.
Width & Edge Control
Slitting quality is decided by more than the target strip width. Jinling checks width tolerance, burr direction, edge smoothness, coil winding, and surface protection together, so stainless steel strip can feed more steadily into stamping, roll forming, tube production, hardware fabrication, and visible trim work.
Release control table
What is checked before slit coils are packed
Flexible Coil Slitting
Process stainless steel master coils into narrow slit coil or strip for tube making, stamping, roll forming, trim, and hardware production.
Width Tolerance Control
Confirm slit width, tolerance tier, and route feasibility before production so downstream dies, formers, and feeding lines run more steadily.
Edge Condition Review
Check burr direction, edge smoothness, camber, wave, and coil build to reduce feeding problems and handling scratches.
Surface Finish Protection
Match film, interleaving, and handling method to 2B, BA, No.4, hairline, mirror, and AFP slit coil requirements.
Export Coil Packing
Prepare slit coils with eye-to-sky or eye-to-wall packing, pallets, straps, edge protection, and container-ready loading support.
Why choose us?
Jinling Steel provides stainless steel slitting service and edge trimming support for buyers who need controlled slit coil, narrow stainless steel strip, stable width tolerance, clean edge condition, protected surface finish, and export-ready coil packing. From appliance parts and decorative profiles to tube production and precision hardware, we help buyers reduce sourcing complexity and prepare stainless steel coils for smoother downstream processing.